Engine Data – T3 2.1l “DJ”

Engine code DJ
Capacity 2109cc³
Number of cylinders/type 4/overhead valve
Production run 2/1985 – 10/1992
Output 82kW – 112bhp DIN @ 4800RPM
Torque 174Nm @ 2800 RPM
Bore 94 mm
Stroke 76 mm
Compression ratio 10.5:1
Minimum octane rating 98 RON
Ignition system transistorized hall effect
Trigger location distributor
Fuel system Bosch Digijet injection
Type multi point fuel injection – intermittent
Description Air flow metered injection
Valve timing at 1mm lift.
Inlet opens 10° BTDC
Inlet closes 48° ABDC
Exhaust opens. 50° BBDC
Exhaust closes. 0° ATDC
Valve dimensions.
Inlet head diameter. 40 mm
Inlet stem diameter. 7.96 – 7.97 mm
Inlet overall length. 122.5 mm
Inlet valve seating face angle. 45°
Exhaust head diameter 34mm
Exhaust stem diameter 8.91 – 8.92 mm
Exhaust overall length 122.5
Exhaust valve seating face angle 45°
Tuning and Emmisions
ignition coil supply voltage 11 volts
primary resistance coil green label .5-.8 ohms – coil grey label .6-.8 ohms
secondary resistance coil green label 2400-3500 – coil grey label 6900-8500 ohms
firing order 1 – 4 – 3 – 2
distributor part number Bosch – 0 237 022 054
ignition timing 10°±1° BTDC @ 800RPM without vacuum see note.
Ignition advance checks 0°-2° @ 1050RPM w/o vacuum and basic timing
2°-6° @ 1300RPM w/o vacuum and basic timing
12°-16° @2400RPM w/o vacuum and basic timing
vacuum advance range 12°-16° engine degrees (9-11)
idle speed 800±50 RPM
oil temp for CO test 80°C
CO content @ idle 2±.5 % volume
HC content @ idle 300 parts per million
Service checks and adjustments.
Spark plugs Bosch W5DCO/ W7CC0
electrode gap .7mm
valve clearance hydraulic
compression pressure 11-14 bar (150 psi-195psi)
oil pressure @ 80°c 2 bar @ 2000RPM
Lubricants and capacities.
Engine oil grade 10W30 (SF)
engine oil capacity with filter 4.5 litres
gearbox oil grade 80W-90W GL4
gearbox oil capacity 3 litres (syncro 4.5 litres)
autobox oil grade dexron (final drive type 90W)
autobox capacity 3 litres (final drive capacity 1.5 litres)
Fuel system.
System pressure without vacuum 3 bar
regulated pressure with vacuum 2.5 bar
coolant temperature sensor 275-375 ohms @ 80°C
injector resistance 15-20 ohms
idle speed control valve 2-10 ohms